Trade remedy and cabinet sourcing economics

The 7.48% Hold: What Commerce's Unchanged China Cabinet Duty Means for Dealer Costing

Washington left the antidumping rate on four Chinese cabinet exporters untouched in the 2024–2025 administrative review. The percentage matters less than the calendar behind it — and what that calendar does to quotes, cash deposits and liquidation risk.

What Commerce actually decided — and what it didn't

On Nov. 12, Woodworking Network's Larry Adams reported that the U.S. Department of Commerce has kept the antidumping duty on wooden kitchen cabinets and vanities from China unchanged at 7.48% for four specific exporters in the 2024–2025 administrative review, according to a Federal Register post [1]. The review examined whether those exporters sold subject merchandise at less than normal value during a period running from April 1, 2024, through March 31, 2025 [1].

Read that sentence the way a procurement manager should read it, and three things stand out.

First, the decision names four specific exporters, not an entire country program [1]. A dealer's landed cost therefore depends on which factory produced the goods — not simply on the word "China" on a purchase order.

Second, the scope language in the review references wooden cabinets and vanities and components [1]. That is not a footnote. Dealers and fabricators who import boxes, doors and fronts separately for local assembly, or who buy component kits to round out a domestic line, are inside the same conversation as dealers buying finished casework.

Third, and most consequentially, the review period closed on March 31, 2025 — and the results were posted in November 2026 [1]. That is roughly nineteen months between the last entry covered by the review and the decision that prices it.

"Unchanged" is not the same as "settled"

An administrative review is a look-back, not a look-ahead. Under standard antidumping mechanics, final results establish the assessment rate applied to entries made during the review window and reset the cash-deposit rate going forward, with Commerce instructing U.S. Customs and Border Protection on collection. Liquidation of those entries can occur long after the container was received, unpacked and installed.

The practical consequence is easy to miss in a busy showroom: a dealer that acted as importer of record for cabinet entries between April 2024 and March 2025 still has exposure on those entries, even though the finished kitchens have been signed off and the client has moved in. A rate held flat removes one variable from that exposure — it does not remove the exposure itself. Dealers should confirm their position with their customs broker or trade counsel rather than assume a closed job file means a closed customs file.

Where the rate actually lands on a dealer's P&L

Importer of record is the whole ballgame

Two dealers can buy the same cabinet from the same factory and carry completely different cost structures, depending on who is the importer of record.

  • Dealer as importer of record. Duty is deposited at entry and trued up at liquidation. The rate is visible, auditable and — critically — negotiable in the sense that the dealer can model it, hedge it in pricing, and change suppliers if the math deteriorates.
  • Dealer buying through a distributor or importer. The duty is embedded in a landed price and effectively invisible. That is not automatically worse; a well-run distributor absorbs volatility and spreads it. But it does mean the dealer cannot verify the basis of a price increase. When a supplier attributes a price move to "tariffs," the reasonable request is entry-level documentation, not a phone call.

For dealers who quote large multi-family or hospitality packages, this distinction should be written into the contract, not left to the relationship.

The quote-validity problem nobody prices in

Kitchen and bath quotes routinely carry 30-, 60- or 90-day validity. Project quotes for builders and developers can run far longer. Lumber and panel prices move with markets dealers can watch weekly. Antidumping rates do not — they move on Federal Register notices [1], on a calendar set by review cycles.

That asymmetry is the real operating issue. A quote built in September and accepted in March can carry a duty assumption that was never explicit in the first place. Three fixes cost almost nothing:

  1. Break cabinetry out as its own line with its own validity window, separate from installation, countertops and labour.
  2. State the duty basis — "priced on the current 7.48% rate applicable to the named exporter" — so a change is a documented adjustment rather than a negotiation.
  3. Add an escalation clause reviewed by counsel, covering trade-remedy changes and scope determinations, not just commodity inflation.

Dual-sourcing has a finish problem, not just a duty problem

Origin diversification is the standard response to tariff exposure, and it is a reasonable one. But it introduces a constraint that specification writers feel before purchasing departments do: finish repeatability across factories.

That constraint is sharpening on the demand side. Arcade Green, an Oahu supplier, recently expanded a Custom Finish Collection that lets customers select virtually any paint colour or stain tone rather than choosing from a fixed prefinished palette, explicitly positioning it against standard collections with limited colour selection [4]. Whether or not a dealer sells that program, the direction of travel is clear: homeowners are buying specificity.

Specificity and dual-sourcing pull against each other. A dealer who splits volume between two factories to manage duty exposure now owns a colour-matching obligation across two production lines, two sheen standards and possibly two substrate suppliers — and the callback risk lands on the installer, not the factory. Before moving volume, get physical control samples from the alternate line in the actual specified finish, compare them under the client's lighting, and document the approval. A duty saving of a few points evaporates against one repaint.

The rest of the kitchen package is moving too

The cabinet box is increasingly priced as part of a package, and the components around it are behaving very differently from one another. FGI Industries' third-quarter 2026 results illustrate the spread: revenue declined 11.9% in the U.S., 9.0% in Canada and 21.8% in Europe, with sanitaryware down 16.6% and shower systems down 22.9%, while other revenue — primarily the Covered Bridge custom kitchen cabinetry business — grew 32.8% year over year as that business expanded geographies and dealer count [3]. Management emphasized pricing and margin discipline while working to convert awarded programs into shipments [3].

For a dealer, the takeaway is not that one category is winning. It is that a single "kitchen and bath" price book now spans categories with genuinely divergent demand curves. Blanket percentage increases across a package are therefore hard to defend line by line. Where cabinetry carries a known, documented duty input and sanitaryware does not, the increase should be traceable to the line that caused it.

Supply model matters here as well. A look at the UK trade kitchen market this month sorted suppliers into three distinct models — national depot networks holding stock, made-to-order manufacturers serving builders and developers, and component suppliers providing board, doors, hinges and worktops to fitters building their own designs — and noted that the difference in model matters more than any single price list [5]. The same three models exist across North America, and each passes duty through differently: stock importers absorb and amortize, made-to-order operations pass it at the point of order, and component suppliers push scope questions down to the fabricator doing the assembly.

The refinish substitute is worth watching

When replacement cost carries an uncertain trade-remedy load, refinishing existing cabinetry becomes a more credible alternative for a segment of homeowners — and there are early, if narrow, signals of interest. Valspar, via Coatings World, reported that Google searches for "kitchen cabinet paint" surged 110% in a 24-hour window as homeowners looked to refresh kitchens, and flagged three considerations for achieving a durable result [8].

Treat that number with appropriate caution: it is a single supplier-reported statistic over a 24-hour window, and search spikes are not orders. But the underlying logic is sound. A refinish job keeps the boxes, the layout and the door profile, changes the colour, and removes imported casework from the equation entirely. For dealers with a refinishing or refacing capability — or a finishing partner — that is a defensible offer to put in front of a client who has balked at a replacement quote. For dealers without one, it is a competitive threat from a channel that does not appear on their radars.

A 90-day checklist for dealers carrying import exposure

  1. Confirm who is importer of record on every stocked import program, and get it in writing.
  2. Match exporters to rates. A 7.48% rate applies to four named exporters [1]; confirm your factory is one of them rather than assuming it.
  3. Audit scope classification. Cabinets, vanities and components all appear in the review language [1]. If you import fronts and boxes separately, verify how each line is classified.
  4. Rebuild quote templates with a separate cabinetry line, a stated duty basis and a reviewed escalation clause.
  5. Stress-test the alternate source in the actual specified finish before shifting volume, not after.
  6. Watch the Federal Register directly. A distributor's price sheet is a downstream signal; the notice is the source.

What to watch next

The rate hold is a data point, not a resolution. The open questions are whether the treatment of those four exporters persists into the next review cycle, whether scope determinations tighten around components, and whether the gap between reviewed and unreviewed exporters widens enough to reorder a dealer's supplier shortlist. None of those answers will arrive by email from a sales rep. They will arrive as a Federal Register post [1] — and the dealers who read it first will be the ones whose quotes still hold.

Sources & further reading

  1. Four Chinese cabinet exporters keep rates unchanged | Woodworking Network — woodworkingnetwork.com
  2. FGI Industries Announces Third Quarter 2026 Results — TradingView News — tradingview.com
  3. Kitchen Cabinets Oahu Supplier Arcade Green: Expands Its Cabinetry Collection With New Custom Finish Options | Press Releases | wboc.com — wboc.com
  4. Best Trade Kitchen Suppliers in the UK | BDC Magazine — bdcmagazine.com
  5. Valspar: Three Things to Consider When Painting Kitchen Cabinets - Coatings World — coatingsworld.com